Skip to content

Manage a subnet

Open a subnet’s page to read its address range, gateway, DHCP, address pools and DNS, and see what uses it. Edit or delete it.

Each subnet has its own page in Lighthouse. It shows the subnet’s settings, and the routers and servers with an address on it. To add a subnet, see Manage a network.

Open a subnet’s page

  1. Open the network’s page. See Manage a network.
  2. Under Subnets, select the subnet’s name.
A subnet page with its Properties card and the routers and servers on it

Read the page

The header shows the subnet’s name, then its address range, IP version and network, for example 10.10.0.0/24 · IPv4 · on app-network. Back to app-network returns to the network.

Properties lists:

  • Name and Address Range.
  • IP Version: 4 or 6.
  • Network: the network the subnet belongs to. Select it to open the network’s page.
  • Gateway: the address servers send traffic through. No Gateway means there is none, so a router can’t route this subnet.
  • DHCP: Yes when servers get their addresses automatically.
  • Address Pools: the parts of the range handed out to servers.
  • DNS Servers: the addresses servers use to look up names. A dash means the defaults.
  • Static Routes, when the subnet has any: each destination and its next hop.
  • Created, and the ID with a button to copy it.

Routers and Servers lists each router and server with an address on the subnet, with that address. Select a name to open it. No router or server has an address on this subnet. means nothing uses it yet.

Ports lists every address held on the subnet: servers, routers and the network’s own DHCP service. Nothing holds an address on this subnet. means it’s empty.

Edit or delete the subnet

The menu next to the name holds Edit Subnet and Delete Subnet, the same actions as the subnet’s row on the network’s page.

  • Edit Subnet changes its name, gateway, DHCP, DNS servers, address pools and static routes. The address range and IP version can’t be changed. Servers get changes at their next DHCP renewal.
  • Delete Subnet asks you to confirm, because servers can no longer get addresses from it. You see Subnet deleted, and you return to the network’s page.

If something goes wrong

  • Subnet Not Found means the subnet was deleted, or you don’t have access to it. Go back to the network and check its Subnets.
  • Servers or other items still use this subnet. Remove them first. Check Ports for what still holds an address, remove it, then try again.
  • If the menu is missing, the network wasn’t created in Lighthouse, or you don’t have permission to manage networks. Ask your account owner.